Burgu makinesi Nordmeyer RB 0/2.3

Drilling rig and soil investigation unit Nordmeyer:

Drilling rig: is equiped with drilling head and can perform any kind of vertical drilling: DTH drilling, auger drilling, core drilling,..

Dinamic probe unit: For dynamic probing as per DIN 4094 the hydr. penetrometer is operating with a drop weight of 10 (anvil), 30 or 50 kgs and a falling height of 50 cm. Exchange of the drop weights required is quick and easy. A mechanical connector of the anvil takes care of the constant falling height of 50 cm. The blows are counted electro-mechanically and recorded in decades. After a penetration depth of 10 decades = 100 cm the penetrometer is stopped by switching off the 10th record.

Applications

 Soil investigation DPL/DPM/DPH

 Soil sampling for soil-mechanical testing for foundations by means of window samplers

 Geological and hydrological testing, e.g. in dumps or for environmental investigations

Dynamic probing by RS 0/2.3

For soil sampling the well-known drive samplers ( pls. refer to "RKS") can be driven into the ground at high blowing energy by means of the penetrometer with low frequency or the fast going hydraulic hammer. Extracting of the sounding and drilling rods is effected by means of hydr. pull-up.

Transport dimensions und weight:

weight: ca. 1400 kg (without accesories)

Lenght: 3,42 m

width: 1,2 m

Height: 1,6 m

Dinamic probing unit and drilling rig Nordmeyer RS 0/2.3 is sold as is with dry drill rods (25 m) and all accesories needed for working. It is well maintained. More inf. on request.